Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 728 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
LOCLFIRM 1 Set to allow firmware update by file
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to permit the user (administrator) to update the firmware from the remote UI using
a local file.
This update is executed as a measure for vulnerability in emergency situations.
Use Case When allowing the administrator to update the firmware using a file
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Disabled, 1: Enabled
Default Value 1
BXNUPLOG 2 ON/OFF of Nup log at Inbox print
Detail To set whether to keep Nup log at Inbox print.
Use Case
When keeping Nup log at Inbox print
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
Default Value
It differs according to the location.
SDLMTWRN 1 [For customization]
PRE-CURL 1 ON/OFF of curl alleviation mode: Heavy
Detail To set ON/OFF of curl alleviation mode for heavy paper, etc.
When 1 is set, the initial rotation is extended and the paper intervals become wider. As a result,
paper curl can be alleviated, but productivity decreases.
Use Case When heavy paper is curled
Adj/Set/Operate Method
Enter the setting value, and then press OK key.
Caution
Be sure to get approval from the user by telling that productivity decreases.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
Default Value
0
AUTO-OUT 1 ON/OFF of jammed ppr auto ejctn function
Detail To set ON/OFF of jammed paper auto ejection function.
When 1 is set, jammed paper is not delivered to the ejection position, but it stays at the current
position at jam occurrence.
Use Case - When user feels unnecessity of jammed paper auto ejection
- When location of jammed paper is necessary to analyze the cause of a problem
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range 0 to 1
0: ON, 1: OFF
Default Value 0
JLK-PWSC 2 ON/OFF of PCAM password auth doc scan
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to scan the PCAM password authentication document with the MEAP application.
Use Case When scanning the PCAM password authentication document
Adj/Set/Operate Method Enter the setting value, and then press OK key.
Display/Adj/Set Range
0 to 1
0: OFF, 1: ON
Default Value
0
8. Service Mode
717