Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 799 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
PRNT-POS 2 ON/OFF of all pauses at error job cancel
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to pause the print operation of following jobs when a job is canceled due to an error
inside the machine (#037, etc.) except service calls during PDL print.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 0
AFN-PSWD 2 Setting of Set/Reg menu access limit
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set restriction on accessing Settings/Registration menu by entering password.
With the setting to enable this mode, password entry of system administrator is required after
pressing Settings/Registration key.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Password is not required, 1: Password is required
Default Value
0
PTJAM-RC 2 Auto reprint setting at PDL print jam
Detail To set to automatically restart printing after jam recovery that occurs with PDL print.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 1
0: Not automatically reprinted, 1: Automatically reprinted
Default Value 1
PDL-NCSW 2 Card mngm setting for PDL print job
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set to make PDL print job to be subject to card management by the Card Reader.
With the setting to enable this mode, PDL print is available only when the card ID of the card
inserted to the Card Reader matches the department ID.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: PDL print is available with no card inserted.
1: PDL print is available only when the card ID matches the department ID in the case that the
card is inserted.
Default Value
0
8. Service Mode
788