manualshive.com logo in svg

Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 425 / 987

Поделиться
Скачать
Canon imageRUNNER ADVANCE C255 Series Скачать руководство пользователя страница 425

E577-0001-02

Paddle Motor error

Detection Description

The Paddle Motor did not move from the HP.

Remedy

1. Check that the connector (P8-4/P8/J8) of the Paddle HP Sensor (S3) is not disconnected.
2. Check that the connector (P5-4/P5/J5) of the Paddle Motor (M3) is not disconnected.
3. Replace the Paddle HP Sensor (S3).
4. Replace the Paddle Motor (M3).
5. Check the conditions of the paddle drive parts (gear).
6. Replace the Finisher Controller PCB.
7. Replace the Harness Assembly.

E577-0002-02

Paddle Motor error

Detection Description

The Paddle Motor did not return to the HP.

Remedy

1. Check that the connector (P8-4/P8/J8) of the Paddle HP Sensor (S3) is not disconnected.
2. Check that the connector (P5-4/P5/J5) of the Paddle Motor (M3) is not disconnected.
3. Replace the Paddle HP Sensor (S3).
4. Replace the Paddle Motor (M3).
5. Check the conditions of the paddle drive parts (gear).
6. Replace the Finisher Controller PCB.
7. Replace the Harness Assembly.

E583-0001-02

Tray Auxiliary Guide Motor error

Detection Description

The Tray Auxiliary Guide Motor did not move from the HP.

Remedy

1. Check that the connector (P8-12/P8-2/J8-2/P8/J8) of the Tray Auxiliary Guide HP Sensor (S6)
is not disconnected.
2. Check that the connector (P6-1/P6/J6) of the Tray Auxiliary Guide Motor (M6) is not
disconnected.
3. Replace the Tray Auxiliary Guide HP Sensor (S6).
4. Replace the Tray Auxiliary Guide Motor (M6).
5. Check the conditions of the tray auxiliary guide drive parts (gear).
6. Replace the Finisher Controller PCB.
7. Replace the Harness Assembly.

E583-0002-02

Tray Auxiliary Guide Motor error

Detection Description

The Tray Auxiliary Guide Motor did not return to the HP.

Remedy

1. Check that the connector (P8-12/P8-2/J8-2/P8/J8) of the Tray Auxiliary Guide HP Sensor (S6)
is not disconnected.
2. Check that the connector (P6-1/P6/J6) of the Tray Auxiliary Guide Motor (M6) is not
disconnected.
3. Replace the Tray Auxiliary Guide HP Sensor (S6).
4. Replace the Tray Auxiliary Guide Motor (M6).
5. Check the conditions of the tray auxiliary guide drive parts (gear).
6. Replace the Finisher Controller PCB.
7. Replace the Harness Assembly.

E602-0001-00

HDD error

Detection Description

HDD failed to be Ready, or HDD was not formatted.
When this error occurs, the system has not been started normally. Therefore, it may not be
recorded in the error log.

Remedy

[Related parts] R1.00
- Harness between the Main Controller PCB (UN81/J6003, J6004) and the HDD
- HDD
- Main Controller PCB (UN81)
[Remedy] Perform the following in the order while checking whether the error is cleared.
1. Check the related harness/cable and connector.
2. Select COPIER> FUNCTION> SYSTEM> CHK-TYPE> "0", and execute "HD-CLEAR". Then,
turn OFF and then ON the main power.
[Reference] All the partitions that can be deleted are deleted.
3. Enter safe mode using (2+8) startup. Then format the HDD and reinstall the system software
using SST or a USB flash drive.
4. Check/replace the related parts.

7. Error/Jam/Alarm

414

Содержание imageRUNNER ADVANCE C255 Series




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов