Canon imageRUNNER ADVANCE C255 Series Скачать руководство пользователя страница 451 | Manualshive

Страница: 451 / 987

Canon imageRUNNER ADVANCE C255 Series Скачать руководство пользователя страница 451

E614-4000-00

Flash PCB error

Detection Description

The OS could not be recognized.
When this error occurs, the system has not been started normally. Therefore, it may not be
recorded in the error log.

Remedy

Perform the following in the order while checking whether the error is cleared.
1. After turning OFF the main power, remove and then install the Flash PCB again to check that
it is properly installed.
2. Enter safe mode using (2+8) startup, and execute Flash Format using a USB flash drive.
3. After replacing the Flash PCB, reinstall the system software using SST or a USB flash drive.

E614-4001-00

Flash PCB error

Detection Description

The OS boot file was not found.
When this error occurs, the system has not been started normally. Therefore, it may not be
recorded in the error log.

Remedy

Perform the following in the order while checking whether the error is cleared.
1. After turning OFF the main power, remove and then install the Flash PCB again to check that
it is properly installed.
2. Enter safe mode using (2+8) startup, and execute Flash Format using a USB flash drive.
3. After replacing the Flash PCB, reinstall the system software using SST or a USB flash drive.

E614-4002-00

Flash PCB error

Detection Description

The OS kernel was not found.
When this error occurs, the system has not been started normally. Therefore, it may not be
recorded in the error log.

Remedy

Perform the following in the order while checking whether the error is cleared.
1. After turning OFF the main power, remove and then install the Flash PCB again to check that
it is properly installed.
2. Enter safe mode using (2+8) startup, and execute Flash Format using a USB flash drive.
3. After replacing the Flash PCB, reinstall the system software using SST or a USB flash drive.

E614-4003-00

Flash PCB error

Detection Description

The OS boot loader was not found.
When this error occurs, the system has not been started normally. Therefore, it may not be
recorded in the error log.

Remedy

Perform the following in the order while checking whether the error is cleared.
1. After turning OFF the main power, remove and then install the Flash PCB again to check that
it is properly installed.
2. Enter safe mode using (2+8) startup, and execute Flash Format using a USB flash drive.
3. After replacing the Flash PCB, reinstall the system software using SST or a USB flash drive.

E614-4010-00

Flash PCB error

Detection Description

The OS in safe mode could not be recognized.
When this error occurs, the system has not been started normally. Therefore, it may not be
recorded in the error log.

Remedy

Perform the following in the order while checking whether the error is cleared.
1. After turning OFF the main power, remove and then install the Flash PCB again to check that
it is properly installed.
2. Enter safe mode using (2+8) startup, and execute Flash Format using a USB flash drive.
3. After replacing the Flash PCB, reinstall the system software using SST or a USB flash drive.

E614-4011-00

Flash PCB error

Detection Description

The file for booting the OS in safe mode was not found.
When this error occurs, the system has not been started normally. Therefore, it may not be
recorded in the error log.

Remedy

Perform the following in the order while checking whether the error is cleared.
1. After turning OFF the main power, remove and then install the Flash PCB again to check that
it is properly installed.
2. Enter safe mode using (2+8) startup, and execute Flash Format using a USB flash drive.
3. After replacing the Flash PCB, reinstall the system software using SST or a USB flash drive.

7. Error/Jam/Alarm

440

«
...
449
450
451
452
453
...
»

Содержание imageRUNNER ADVANCE C255 Series




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов