manualshive.com logo in svg

Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 423 / 987

Поделиться
Скачать
Canon imageRUNNER ADVANCE C255 Series Скачать руководство пользователя страница 423

E500-0000-02

Finisher communication error

Detection Description

An error was detected on the finisher side.

Remedy

1. Check that the connector (CN1/P3/J3) of the Interface Harness is not disconnected.
2. Replace the Finisher Controller PCB.
3. Replace the Interface Harness.

E530-0001-02

Front Alignment Plate HP Sensor error

Detection Description

The Front Alignment Motor did not move from the HP.

Remedy

1. Check that the connector (P8-3/P8/J8) of the Front Alignment Plate HP Sensor (S4) is not
disconnected.
2. Check that the connector (P6-12/P6-2/J6-2/P6/J6) of the Front Alignment Motor (M4) is not
disconnected.
3. Replace the Front Alignment Plate HP Sensor (S4).
4. Replace the Front Alignment Motor (M4).
5. Check the conditions of the front alignment drive parts (belt and gear).
6. Replace the Finisher Controller PCB.
7. Replace the Harness Assembly.

E530-0002-02

Front Alignment Motor error

Detection Description

The Front Alignment Motor did not return to the HP.

Remedy

1. Check that the connector (P8-3/P8/J8) of the Front Alignment Plate HP Sensor (S4) is not
disconnected.
2. Check that the connector (P6-12/P6-2/J6-2/P6/J6) of the Front Alignment Motor (M4) is not
disconnected.
3. Replace the Front Alignment Plate HP Sensor (S4).
4. Replace the Front Alignment Motor (M4).
5. Check the conditions of the front alignment drive parts (belt and gear).
6. Replace the Finisher Controller PCB.
7. Replace the Harness Assembly.

E531-8001-02

Staple Motor error

Detection Description

The Staple Motor did not move from the HP.

Remedy

1. Check that the connector (P9-1/P9/J9) of the Staple HP Sensor (S11) is not disconnected.
2. Check that the connector (P10-1/P10/J10) of the Staple Motor (M9) is not disconnected.
3. Replace the Stapler.
4. Replace the Finisher Controller PCB.
5. Replace the Harness Assembly.

E531-8002-02

Staple Motor error

Detection Description

The Staple Motor did not return to the HP.

Remedy

1. Check that the connector (P9-1/P9/J9) of the Staple HP Sensor (S11) is not disconnected.
2. Check that the connector (P10-1/P10/J10) of the Staple Motor (M9) is not disconnected.
3. Replace the Stapler.
4. Replace the Finisher Controller PCB.
5. Replace the Harness Assembly.

E537-0001-02

Rear Alignment Motor error

Detection Description

The Rear Alignment Motor did not move from the HP.

Remedy

1. Check that the connector (P7-5/P7/J7) of the Rear Alignment Plate HP Sensor (S5) is not
disconnected.
2. Check that the connector (P5-13/P5-3/J5-3/P5/J5) of the Rear Alignment Motor (M5) is not
disconnected.
3. Replace the Rear Alignment Plate HP Sensor (S5).
4. Replace the Rear Alignment Motor (M5).
5. Check the conditions of the rear alignment drive parts (belt and gear).
6. Replace the Finisher Controller PCB.
7. Replace the Harness Assembly.

7. Error/Jam/Alarm

412

Содержание imageRUNNER ADVANCE C255 Series




























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов