Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 809 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
EXP-CRYP 1 Confdntial encrypt ON/OFF:add book exprt
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to encrypt the confidential part (password part) in the Address Book when exporting
the Address Book and device settings via RUI.
When 0 is set, the confidential part in the Address Book is exported without encryption.
Use Case When there is a need to export password without encryption because of operation and tool
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure not to allow the user to execute export without encryption because of security concern.
Display/Adj/Set Range 0 to 1
0: OFF, 1: ON
Default Value 1
SMD-EXPT 1 Setting of export target data: remote UI
Detail To set whether to export "service mode data" from remote UI.
When 1 is set, "service mode data" is displayed as the target data of export on remote UI. When
installing more than 1 machine at the same time, the same service mode data can be registered.
Use Case
When installing more than 1 machine at the same time
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Hide, 1: Display
Default Value
0
Supplement/Memo If selecting "service mode data" as the target data of export on remote UI after setting SMD-EXPT
to 1, service mode data can be exported.
SNDSTREN 1 Set of setting delete aftr scan and send
Detail To set whether to delete the transmission settings except for the address after transmission from
the "Scan and Send" screen.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 0 to 2
0: Delete, 1: Retain only the transmission setting, 2: Retain the transmission setting and address
Default Value It differs according to the location.
FAXSTREN 1 Set of setting delete aftr fax transmit
Detail To set whether to delete the transmission settings except for the address after transmission from
the "Fax" screen.
Use Case
Upon user's request
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: Delete, 1: Retain
Default Value
It differs according to the location.
8. Service Mode
798