Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 739 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > FNC-SW
DCONRTRY 2 Set of retry at DCON comctn error occur
Detail To set whether to perform retry processing when communication error occurs between the Main
Controller and the DC Controller.
Set 1 to 3 when E733 occurs. Communication error may be avoided by retry. (It is effective
especially when E733-0001/0002/0005 occurs.)
If communication error occurs during finishing job while 3 is set, duplicated pages may be output
due to retry. In such case, set 0 to 2. Since retry is not performed during finishing job, duplication
of pages does not occur, but E733 occurs.
Use Case When E733 occurs
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When 3 is set, duplication of pages may occur during finishing job.
Display/Adj/Set Range 0 to 3
0: OFF
1: OFF during job, ON in other states
2: OFF during finishing job, ON in other states
3: ON
Default Value 1
Supplement/Memo Finishing job: Job that 2-sided print, binding and/or collate set in "Finishing" of the printer driver.
FL-START 2 [For customization]
D-DLV-Y 1 Set Y Drum prior dvry alarm notice tmg
Detail To set the timing to notify the prior delivery alarm for the Drum Unit (Y).
Use Case When changing the timing to notify the end of life according to the usage status
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 50 to 1000
Unit %
Default Value It differs according to the location.
Related Service Mode COPIER> COUNTER> LF> Y-DRM-LF
Amount of Change per
Unit
1
D-DLV-M 1 Set M Drum prior dvry alarm notice tmg
Detail To set the timing to notify the prior delivery alarm for the Drum Unit (M).
Use Case When changing the timing to notify the end of life according to the usage status
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 50 to 1000
Unit %
Default Value It differs according to the location.
Related Service Mode COPIER> COUNTER> LF> M-DRM-LF
Amount of Change per
Unit
1
8. Service Mode
728