Canon imageRUNNER ADVANCE C255 Series, Руководство по обслуживанию, Страница: 752 / 987

COPIER (Service mode for copier) > OPTION (Specification setting mode) > NETWORK
LPD-PORT 2 Setting of LPD port number
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the LPD port number.
Use Case Upon user's request
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range 1 to 65535
Default Value 515
Supplement/Memo LPD port: Network port for TCP/IP communication when making prints through network.
WUEN-LIV 2 Recovery time setting after sleep notice
Detail To set the time from the sleep start from network without job assignment until the mode is shifted
to the sleep mode.
Use Case
When setting the startup time after sleep notification
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
10 to 600
Default Value
15
IFX-CHIG 1 Set operation by IFAX recv mail content
Detail To set the number of characters for the IFAX received mail content, so that the mail is not printed/
forwarded when the characters in the text is less than the number of specified characters.
This machine can output blank paper because some senders send e-mail text consists of linefeed
codes only. In such case, specify 2 (number of characters) so that there will be no output of blank
paper.
In the case of specifying any number other than 0, header/footer is printed/forwarded in 1 sheet
only if the e-mail (body) text is less than the specified value while no TIFF file is attached.
As the value is incremented by 1, the number of target characters in e-mail body text is increased
by 1 character.
Use Case When reducing print of blank paper due to e-mail received by IFAX
Adj/Set/Operate Method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure to get approval from the user by telling that there will be no print of e-mail (body) text if
the number of characters is less than the specified value.
Display/Adj/Set Range 0 to 999
0: E-mail (body) text is not ignored.
Default Value 0
Supplement/Memo 1 Japanese Kanji character is calculated as 2 bytes, and the control codes (such as linefeed code,
etc) are included in the number of characters.
DNSTRANS 1 Setting of DNS transfer priority
Detail *Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set priority order of the protocol (IPv4/IPv6) to be used for DNS query.
In the case of using both IPv6 and IPv4 while the DNS server supports IPv4, it takes time because
of timeout when executing DNS query with priority on IPv6. Giving priority on query by IPv4 can
shorten the time.
Use Case
When it takes time to execute DNS query with priority on IPv6 because the DNS server supports
IPv4
Adj/Set/Operate Method
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/Adj/Set Range
0 to 1
0: IPv4, 1: IPv6
Default Value
1
8. Service Mode
741