Canon CX-G6400, Руководство пользователя

Страница: 182 / 218

178
Chapter 6 Troubleshooting
Error Message Error Content Handling
Stacker overloaded Paper ejected to the auto
stacker has exceeded the
upper limit. Remove the ejected paper.
Stacker inspection Paper is jammed in the auto
stacker. Remove the ejected paper.
Paper retention X
("X" represents number)
Paper still remains after removal
of jammed paper. Open the upper unit and check
the transport area.
（→
P.173
）
Feed error 1 The paper is not fed.
Or there is paper dust stuck to
the pick-up roller. Reload a paper.
（→
P.15
）
Check to make sure the printer
driver paper type settings are
correct.
（→
P.46
）
*When using a custom paper size
（→
P.50
）
If the same error occurs again,
there could be paper dust stuck
to the pick-up roller. Clean the
pick-up rollor.
（→
P.157
）
Feed error 2 Paper has been pulled out of
the feeder tray during printing. Do not pull out paper during
printing. If it is absolutely
necessary to pull out paper
during printing, press the PAUSE
key on the operation panel to
stop printing temporarily, and
then pull out paper.
Thick feed lever position
error 1 The thick feed lever position is
not correct. When using special heavy paper
or plastic card, pull the thick
paper transport lever.
（→
P.25
）
Thick feed lever position
error 2 The thick feed lever position is
not correct. When using other than special
heavy paper or plastic card, push
in the thick paper transport lever
original position.
（→
P.25
）