W-54
Using RemoteCapture
Checking Shooting Settings
You can confirm the camera settings used when images are taken.
Click [
] (the Detail setting button) in the Shooting window and
select the [Shooting Settings] tab.
\
The camera settings used when images are taken are displayed.
Interval Timer Shooting
This function allows you to specify the interval between shots and the number of shots.
1
Click [
] (the Detail setting button) in the Shooting window and
select the [Interval Timer Shooting] tab.
\
The [Interval Timer Shooting] tab sheet in the Detailed Settings window appears.
2
Enter the shooting interval and the total number of shots. Then
click the [Start] button.
●
You can set a shooting interval between 5 seconds and 60 minutes in 1-second
increments.
●
You can set up to a maximum of 9999 shots.
\
Interval timer shooting is performed using the specified interval between shots and
the specified number of shots.
Depending on the available capacity on your computer’s hard disk, the maximum
number of available shots that can be set may be less than 9999. You can check the
number of shots that can be set by referring to the number of available shots shown in
the Shooting window. (W-50)
On some types of computers, if you set a short interval between shots and there is
insufficient time to download and save the images, it may not be possible to take shots
at the specified interval. If this occurs, set a longer interval between shots and take the
shots again.
Printing Images
You can print images. All the images shown in the thumbnail view are printed in index format.
The time of shooting and the file names are printed with the images.
1
Select [Print Index] in the [File] menu in the Save window.
\
The Printer Setup dialog box appears.
2
Select the printer to be used, specify the print settings and print
images.
