M-40
5
Select the folder to be used for saving the transferred images and
then click the [Choose] button.
\
The folder is specified and then the [General Settings] tab sheet appears.
6
Click the [OK] button.
\
The settings are applied and the [Preferences] dialog box closes to end the
procedure.
Transferring Images to Retouching Software
This section describes how to transfer images displayed in File Viewer Utility to the retouching
software and also describes how to make settings for image transfer.
●
In order to transfer images, you will need the retouching software such as
Adobe Photoshop Elements 2.0.
●
Be sure to make the image transfer settings before transferring images.
Specifying the Image Transfer Settings
Before transferring images, it is necessary to specify the retouching software to which images
will be transferred and the folder for saving the transferred images. The descriptions given
here show how to transfer images to Photoshop Elements 2.0, as an example.
1
Display the [General Settings] tab sheet in the [Preferences]
dialog box. (M-42)
2
Click the [Browse] button of [Image Transfer Application].
\
The [Select application] dialog box
appears.
3
Select [
Photoshop Elements 2.0] and then click the [Choose]
button.
●
On the drive where Photoshop Elements 2.0 is installed, open the [Photoshop
Elements 2.0] folder and select [Photoshop Elements 2.0].
\
Photoshop Elements 2.0 is specified as the retouching software to which images will
be transferred and then the [General Settings] tab sheet appears.
4
Click the [Browse] button of [Image transfer folder].
\
The [Select transfer folder] dialog
box appears.
It is not necessary to specify the retouching software to which the images will be
transferred and the folder for saving the transferred image every time unless you wish
to change those settings.
