W-6
Installing the Software on Windows
Dedicated
USB cable
DIGITAL terminal
Dedicated USB cable
USB port
11
Restart your computer.
●
Check that
is inserted in [Yes, I want to restart my computer now.] and then
click the [Finish] button.
●
When [EOS Kiss REBEL 300D] screen (event screen) and the [Scanner and
Camera Wizard] dialog box appear, click the [Cancel] buttons and close all the
open windows.
●
When a window appears prompting you to restart your computer, restart the
computer.
Do not set the camera’s power switch to <OFF> until the [Found New Hardware]
message automatically disappears.
Do not remove the CD before restarting your PC. Remove the CD in step 12.
12
Remove the CD.
\
Once the computer has restarted, remove the CD.
●
When the Installer panel appears, click [Exit] to exit the Installer and then remove
the CD.
13
Check the camera’s communication mode.
●
Set the camera’s power switch
to <ON> and check that
[Communication] in menu
<
> is set to [Normal].
●
When you have finished the
settings, set the camera’s power
switch to <OFF>.
14
Connect the camera to your computer.
15
Set the camera’s power switch to <ON> to complete the
installation.
\
When you set the camera’s power switch to <ON>, the [Found New
Hardware] message appears. When the message automatically disappears,
installation is complete.