M-52
Using RemoteCapture
Interval Timer Shooting
This function allows you to specify the interval between shots and the number of shots.
1
Select [Interval Timer Shooting] in the [File] menu.
\
The Interval Timer Shooting warnings dialog box appears.
2
Check the information in the warnings and then click the [Yes]
button.
\
The [Interval Timer Shooting] dialog box appears.
3
Enter the shooting interval and the total number of shots. Then
click the [Start] button.
●
You can set a shooting interval between 5 seconds and 60 minutes in 1-second increments.
●
You can set up to a maximum of 9999 shots.
\
Interval timer shooting is performed using the specified interval between shots and
the specified number of shots.
On some types of computers, if you set a short interval between shots and there is insufficient
time to download and save the images, it may not be possible to take shots at the specified
interval. If this occurs, set a longer interval between shots and take the shots again.
Depending on the available capacity on your computer’s hard disk, the maximum number of
available shots that can be set may be less than 9999. You can check the number of shots that
can be set by referring to the number of available shots shown in the Shooting window. (M-48)
Checking Shooting Settings
You can confirm the camera settings used when images are taken.
Select [Display Shooting Modes] in the [File] menu.
\
The [Shooting Settings] dialog box appears, displaying the camera settings used
when images are taken.
●
Clicking the [OK] button closes the [Shooting Settings] dialog box.
Printing Images
You can print images. All the images shown in the thumbnail view are printed in index format.
The time of shooting and the file names are printed with the images.
1
Select [Print Index] in the [File] menu.
\
The Printer Setup dialog box appears.
2
Select the printer to be used, specify the print settings and print
images.