Appendix F System Installation
Step 2
Carefully open the PIPS detector shipping box and remove the detector being
careful not to let the detector slide out of the protective cap. Screw the detector
onto the detector installation base by rotating the detector clockwise. Set the
base/detector assembly on a sturdy flat surface and remove the protective cap from
the PIPS detector. Refer to Figure 42.
Figure 42 Installing the PIP Detector to the Installation Base
Step 3
With the base/detector assembly on a sturdy flat surface, carefully position the
open end of the detector installation tool over the face of the PIPS detector and
push gently while rotating the installation tool clockwise. A slight rocking of the
installation tool may help in initially starting the detector into the tool. Rotate the
detector/tool assembly counterclockwise to remove from the base. Refer to Figure
43.
130
iMatic Automatic Counting System User's Manual - 9239221K
