Installation of Unit
securely fastened to the table using eight 5/16 in. grade 8 bolts, as shown in Figure 35,
after removing the cabinets in step 2.
Carefully remove the larger rear cabinet housing by removing the four 6 - 32 x 1/2 in.
socket head cap screws from the back and the two 6 - 32 x 3/8 in. socket head cap
screws from the side with a 7/16 inch Allen wrench and lifting up on the rear cabinet.
Place the rear cabinet aside. Carefully remove the smaller front cabinet in a similar
manner by removing the four 6 - 32 x 3/8 in. socket head cap screws. Place the front
cabinet aside.
Figure 35 Mounting the Instrument to the Table
iMatic Automatic Counting System User's Manual - 9239221K
123
