Define Calibrations
9 Define Calibrations
Select Calibration
> 1 Calibration 1
Define Calibration 1
1 Edit Cal Name
2 Bkg Cal Parameters
3
α
Eff Cal Parameters
4
β
Eff Cal Parameters
5 Auto Cal Sequence Start
2 Calibration 2
3 Calibration 3
4 Calibration 4
5 Calibration 5
6 Calibration 6
7 Calibration 7
8 Calibration 8
9 Calibration 9
10 Calibration 10
Ten user calibrations, labeled 1 through 10, can be set up. Each calibration is defined
through the front panel, and controls the
i
Matic calibration procedures. The
i
Matic will
default to the first procedure.
Move the “>” cursor to the calibration procedure to be edited and then press
Enter
.
Move the “>” cursor to the calibration parameter you want to change and then press the
Enter
key.
Edit Cal Name
The Edit Cal Name menu item allows you to enter a name for a calibration procedure
up to 22 alphanumeric characters.
To edit a calibration name:
1.
Press the
Setup
key.
2.
Using the arrow keys, position the cursor “>” to item “9” in the menu, Define
Calibrations, and then press the
Enter
key.
3.
Using the arrow keys, select the calibration (1 through 10), and then press the
Enter
key.
4.
Using the arrow keys position the cursor “>” to item “1”, Edit Cal Name, and
then press the
Enter
key.
iMatic Automatic Counting System User's Manual - 9239221K
57
