Campbell CR6 Series, Руководство оператора

Страница: 371 / 690

Section 7. Installation
371
7.7.18.6.2 Create Send-Text File
Create a file from which to send a serial string. The file shown in the figure
HyperTerminal Send-Text File Example
(p. 371)
will send the string
[2008:028:10:36:22]C to the CR6. Use
Notepad
(Microsoft
Windows
utility) or
some other text editor that will not place hidden characters in the file.
FIGURE 81: HyperTerminal Send-Text
File Example
To send the file, click
Transfer
|
Send Text File
|
Browse
for file, then click
OK
.
7.7.18.6.3 Create Text-Capture File
Figure HyperTerminal Text-Capture File Example
(p. 371)
shows a HyperTerminal
capture file with some data. The file is empty before use commences.
FIGURE 82: HyperTerminal Text-Capture File Example
Engage text capture by clicking on Transfer | Capture Text | Browse , select the
file, and then click OK .
7.7.18.6.4 Serial I/O Example II
CRBasic example Measure Sensors / Send RS-232 Data
(p. 372)
illustrates a use of
CR6 serial I/O features.
Example — An energy company has a large network of older CR510 dataloggers
into which new CR6 dataloggers are to be incorporated. The CR510 dataloggers
are programmed to output data in the legacy Campbell Scientific Printable ASCII
format, which satisfies requirements of the customer's data acquisition network.