Cambium Networks PTP 850E, Руководство пользователя

Страница: 551 / 560

Chapter 21: Alarms List PoE Injector Pin-outs and LEDs – Passive PoE
phn-3963_008v000
Page 21-48
Alarm ID Type Description Severity Probable Cause Corrective Action Notes
31004 Alarm
Unsuitable software
configuration for MIMO
Critical
1. Not all MIMO carriers are set
to same radio script or script is
not compatible for MIMO.
2. Radio TX and RX frequency is
not identical on all MIMO
carriers.
3. XPIC or Multi radio or ATPC
features are enabled.
1. Load same MIMO compatible
radio script to all MIMO
carriers.
2. Set same TX and RX frequency
on all MIMO carriers.
3. Disable XPIC, Multi radio and
ATPC on all MIMO carriers.
(2)
31005 Alarm
Clock source sharing cable
unplugged
Critical
1. Faulty coaxial cable between
master and slave RFUs
2. Mate does not exist
1. Replace faulty coaxial cable
and reset Master RFU.
2. Replace faulty RFU.
(2)
31100 Alarm Radio script is incompatible to
AMCC Critical MRMC Script selected does not
support AMCC Group type/subtype Set AFR Script in both Agg1 & Agg2
carriers
31101 Alarm Inconsistent MRMC script
between members Critical All members of a group must be
configured to the same MRMC
Script Set the members to the
appropriate MRMC script
31102 Alarm Inconsistent radio frequency Critical Radio TX/RX frequency is not
identical on all AMCC carriers Set same radio TX/RX frequency on
all AMCC carriers
31103 Alarm Agg 1 failed Bring-up procedure Critical Agg1 did not complete Bring-up
successfully Drop both Agg1 & Agg2 into single
carrier mode (Pre-Init)
31104 Alarm Invalid ACM configuration Critical AMCC member have been set to
fixed profile Set AMCC member to adaptive
ACM profiles
5100 Alarm Master key mismatch cross
over the link Critical Master Key was not set correctly. Verify the Master Key.
(1)
5101 Alarm No Master Key set, default
value used Warning Crypto module has been enabled,
but no Master Key has been
loaded. Set the Master Key.
(1)