Cambium Networks PTP 850E, Руководство пользователя, Страница: 437 / 560

Chapter 16: Quality of Service (QoS) (CLI) Displaying Egress Statistics (CLI)
phn-3963_008v000
Page 16-48
Parameter
Input Type
Permitted
Values
Description
layer-1 Boolean yes
no
yes
– Statistics are represented as Layer 1
statistics, including preamble and IFG.
no
– Statistics are represented as Layer 2 statistics.
The following command displays PMs for the CoS 0 queue in Service Bundle 1, on GbE 2. The PMs are cleared after
they are displayed.
eth type eth [1/2]> tm-queue show statistics service-bundle-id 1 cos 0
clear-on-read yes layer-1 yes
The following command clears PMs for all queues in Service Bundle 1, on GbE 2.
eth type eth [1/2]> tm-queue clear statistics service-bundle-id 1
Displaying Service Bundle-Level PMs (CLI)
PTP 850 supports the following counters per service bundle at the service bundle level:
•
Transmitted Green Packets (64 bits counter)
• Transmitted Green Bytes (64 bits counter)
• Transmitted Green Bits per Second (32 bits counter)
• Dropped Green Packets (64 bits counter)
• Dropped Green Bytes (64 bits counter)
• Transmitted Yellow Packets (64 bits counter)
•
Transmitted Yellow Bytes (64 bits counter)
• Transmitted Yellow Bits per Second (32 bits counter)
• Dropped Yellow Packets (64 bits counter)
• Dropped Yellow Bytes (64 bits counter)
To display service bundle-level PMs, enter interface view for the interface and enter the following command:
eth type eth [x/x]> tm-service-bundle show statistics service-bundle-id
<service-bundle-id> clear-on-read <clear-on-read> layer-1 <layer-1>
To clear service bundle-level PMs for all service bundles on an interface, enter interface view for the interface and
enter the following command:
eth type eth [x/x]> tm-service-bundle clear statistics
Table 158 Egress Service Bundle Level PMs CLI Parameters