Cambium Networks PTP 850E, Руководство пользователя, Страница: 310 / 560

Chapter 13: Unit Management (CLI) Configuring SNMP (CLI)
phn-3963_008v000
Page 13-27
Configuring SNMP (CLI)
PTP 850 supports SNMP v1, V2c, and v3. You can set community strings for access to PTP 850 units.
PTP 850Eupports the following MIBs:
• RFC-1213 (MIB II).
•
RMON MIB.
• Proprietary MIB.
Access to the unit is provided by making use of the community and context fields in SNMPv1 and
SNMPv2c/SNMPv3, respectively.
This section includes:
•
Configuring Basic SNMP Settings (CLI)
• Configuring SNMPv3 (CLI)
•
Displaying the SNMP Settings (CLI)
• Configuring Trap Managers (CLI)
Configuring Basic SNMP Settings (CLI)
To enable SNMP, enter the following command in root view:
root> platform security protocols-control snmp admin set <admin>
To specify the SNMP version, enter the following command in root view:
root> platform security protocols-control snmp version set <version>
To specify the SNMP read and write communities, enter the following command in root view:
root> platform security protocols-control snmpv1v2 set read-community
<read-community> write-community <write-community>
Table 59 Basic SNMP CLI Parameters
Parameter Input Type Permitted Values Description
admin Variable enable
disable Select enable to enable SNMP
monitoring, or disable to
disable SNMP monitoring.
version Variable v1
v2
v3 Specifies the SNMP version.
read-
community Text String Any valid SNMP read
community. The community string for the
SNMP read community.
write-
community Text String Any valid SNMP write
community. The community string for the
SNMP write community.