Cambium Networks PTP 850E, Руководство пользователя

Страница: 494 / 560

Chapter 19: Alarm Management and Troubleshooting (CLI) Performing Diagnostics (CLI)
phn-3963_008v000
Page 19-21
Enabling Local MEPs (CLI)
Once you have added a MEP and defined it as a local MEP, you must enable the MEP by setting the MEP to Active,
enabling CCM messages from the MEP, and assigning a CCM-LTM priority to the MEP.
To set a MEP to Active, enter the following command in root view:
root> ethernet soam mep active set meg-id <meg-id> mep-id <mep-id> mep-
active <mep-active>
The following command sets MEP 35 on MEG 2 to Active.
root> ethernet soam mep active set meg-id 2 mep-id 35 mep-active true
To enable or disable the sending of CCM messages on a MEP, enter the following command in root view:
root> ethernet soam mep ccm-enable set meg-id <meg-id> mep-id <mep-id>
enabled <ccm-enabled>
The following command assigns enables CCM messages for MEP 35 on MEG 2.
root> ethernet soam mep ccm-enable set meg-id 2 mep-id 35 enabled true
To set a MEP’s CCM-LTM priority, enter the following command in root view:
root> ethernet soam mep ccm-ltm-prio set meg-id <meg-id> mep-id <mep-id>
ccm-ltm-priority <ccm-ltm-priority>
The following command sets the CCM-LTM priority of MEP 35 in MEG 2 to 5.
root> ethernet soam mep ccm-ltm-prio set meg-id 2 mep-id 35 ccm-ltm-
priority 5
Table 182 MEP CLI Configuration Parameters
Parameter Input Type Permitted Values Description
meg-id Number 1-4294967295 Enter an ID for the MEG.
mep-id Number 1-8191 A name to identify the MEG.
sp-id Number 0-32 The Service Point ID of the service point to which
you want to assign the MEP.
mep-dir Variable up
down The MEP direction.