Cambium Networks PTP 850E, Руководство пользователя

Страница: 151 / 560

Chapter 6: Ethernet Services and Interfaces Configuring Ethernet Service(s)
phn-3963_008v000
Page 6-13
Parameter Definition
CoS Mode Indicates how the service point handles the CoS of frames that pass
through the service point. Options are:
•
sp-def-cos – The service point re-defines the CoS of frames that pass
through the service point, according to the Default CoS (below). This
decision can be overwritten on the service level.
• Interface-Decision – The service point preserves the CoS decision
made at the interface level. The decision can still be overwritten at
the service level.
•
PCL – Reserved for future use.
• TCAM – Reserved for future use.
Default CoS The default CoS. If the
CoS Mode
is
sp-def-cos
, this is the CoS assigned to
frames that pass through the service point. This decision can be
overwritten at the service level. Possible values are 0 to 7.
Split horizon group Reserved for future use.
3. Ethernet Service Points – Egress Attributes
Select Egress in the Ethernet Service Points page to display the Ethernet Service Points – Egress Attributes table.
Table 47 ` describes the parameters displayed in the General SP Attributes table.
Figure 74
Ethernet Service Points Page – Egress Attributes
Table 33 Service Point Egress Attributes
Parameter Definition
Service point ID
This ID is unique within the service. For Point-to-Point and Multipoint services, the
range of values is 1-32. For Management services, the range of values is 1-30.
Service point name A descriptive name for the service point (optional). The Service Point Name can be
up to 20 characters.