Cambium Networks PTP 850E, Руководство пользователя

Страница: 172 / 560

Chapter 6: Ethernet Services and Interfaces Viewing Ethernet PMs and Statistics
phn-3963_008v000
Page 6-34
Figure 90: Ethernet Port RX PM Report Page
2. In the Interface field, select the interface for which you want to display PMs.
3. In the Interval Type field:
o To display reports for the past 24 hours, in 15 minute intervals, select 15 minutes .
o To display reports for the past month, in daily intervals, select 24 hours .
Table 51 describes the Ethernet RX port PMs.
Table 37
Ethernet RX Port PMs
Parameter Definition
Interval For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
Peak... Average... bytes...
Packets... Various peak transmission rates (per second) and average RX rates (per
second), both in bytes and in packets, for each measured time interval.
RX bytes Layer 1 exceed
threshold (sec) The number of seconds the RX bytes exceeded the specified threshold
during the interval. For instructions on setting the threshold, see
Setting
the Ethernet Port RX Threshold .
Invalid data flag Indicates whether the values received during the measured interval are
valid. An x in the column indicates that the values are not valid (for
example, because of a power surge or power failure that occurred during
the interval).
To clear the PMs, click Clear All .
Enabling or Disabling Gathering of Port RX PM Statistics per Interface
To select the interfaces for which to gather and display Port RX PMs:
1.
In the Ethernet Port RX PM Report page, click
PM Admin
. The Ethernet PM Port Admin page opens.