Cambium Networks PTP 850E, Руководство пользователя

Страница: 266 / 560

Chapter 10: Alarm Management and Troubleshooting Performing Diagnostics
phn-3963_008v000
Page 10-20
Note
In the current release, the MD level is not relevant to the SOAM functionality.
6. Click
Apply
, then
Close
.
The MHF (MIP) Creation field displays the contents of MHF format included in the CCMs sent in this MD (in the
current release, this is MHF none and MHF default ).
The
Sender TLV Content
field displays the contents of TLVs included in the CCMs sent in this MD (in the current
release, this is only
Send ID Chassis
).
Configuring MA/MEGs
You can configure up to 64 MEP pairs per network element:
•
Fast MEGs have a CCM interval of 1 second.
• Slow MEGs have a CCM interval of 10 seconds, 1 minute, or 10 minutes.
You can configure up to 1024 Slow MEPs and up to 256 Fast MEPs per network element. You can configure up to
348 Slow Local MEPs (a local MEP in a Slow MEG) and up to 64 Fast Local MEPs (a local MEP in a Fast MEG) per
network element.
To add a MEG:
1.
Select Ethernet > Protocols > SOAM > MA/MEG . The SOAM MA/MEG page opens.
Figure 169 SOAM MA/MEG Page
2. Click Add MEG . The SOAM MA/MEG – Add page opens.