CAI 700 NDIR, Руководство оператора

Страница: 104 / 205

700 NDIR Analyzer 6-20-2017
104
Output Assignments
→ → → → →
The Output Assignments screen allows the operator to view or change the signals
assigned to the programmable analog outputs. From the Programmable Analogs menu
press to access the Output Assignments screen.
Use the Up/Down arrows to highlight the field you intend to change. Press
to open the field and use the Up/Down arrows to change it to the
desired signal. Press again to close the field. Press to save your changes.
NOTES:
1. Analog Output 1 (for example) is listed as AO-1 in the Output column.
2. For information on analog output connections see Analog and Digital Interface .
The following output signals can be programmed by the operator using the Output
Assignments screen:
Channel1 : Measured concentration of Channel 1
Channel2 : Measured concentration of Channel 2