CADDX RANGER 7600, Руководство по установке

Страница: 34 / 38

34
APPENDIX 2 - REPORTING IN CONTACT ID
The 7600 has the ability to report Ademco Contact ID transmissions to either or both phone numbers. Each report
in Contact ID consists of an Event Code and a Zone or User ID. The Zone is programmed in the first digit of each
report. When programming the event code (the second digit) for zones 1-6 (locations 105, 107, 109, 111, 113, or
115), programming a zero will cause the event code to follow the zone type for that zone. The event code for the
zone type can be overridden by programming a digit from the table below. Duress (location 87), AUX 1 (location 89),
AUX 2 (location 91), and Keypad Panic (location 93) must be programmed from the table below.
Programmed Event Code Contact ID Code Description
1 110 Fire Alarm
2 122 Panic alarm
3 130 Burglary Alarm
4 131 Perimeter Alarm
5 132 Interior Alarm
6 133 24 Hour Burglary
7 134 Entry Alarm
8 135 Day/Night Alarm
9 150 Non-Burglary 24 Hour
10 121 Duress Alarm
11 100 Medical Alarm
12 123 Audible Panic Alarm
13 137 Tamper Alarm
14 602 Periodic Test
15 300 System Fault
The following reports will send fixed event codes regardless of the number programmed in the event code location:
Event Contact ID Code Event Code Location
Keypad Tamper 137 95
Download Complete 412 97
Autotest 602 99
Fail to Communicate 354 101
Closing 401 102
Opening 401 103
Start Test/End Test 607 116
AC Loss 301 121
Low Battery 302 123
Trouble 380 124
Bypass 570 125
Restore * 126
Cancel 406 127
Exit Error 138 210
Recent Closing 401 211
Auxiliary 3 140 253
User on site 605 254
* This will send the event code for the zone restored.