CADDX RANGER 7600, Руководство по установке

Страница: 23 / 38

23
LOCATION 192-195: RESERVED
LOCATION 196: ANSWERING MACHINE DEFEAT
Location 196 contains the answering machine defeat. To defeat an answering machine, two telephone calls must
be made to the premises. On the first call, let the phone ring the same number of times (or less) as the number
programmed in this location (maximum 3) and disconnect. The control panel will detect these rings and start a 45
second timer, during which, the control panel will answer the next call on the first ring. This location will override
location 280 if it contains something other than a “0" (factory default).
LOCATION 197: FORCE ARMING
Programming a "1" in location 197 will allow the Ranger 7600 to be armed without all zones secure (no "Ready" LED
illuminated). At the end of the exit delay, unsecured zones will automatically bypass, while zones that secure will
become armed. Factory default is "0", Force Arming disabled.
LOCATIONS 198-201: AUTOMATIC ARMING TIME
Locations 198-201 contain the time for automatic arming if enabled in location 202. Enter the time in 24 hour time.
LOCATION 202: AUTOMATIC ARMING
Programming a "1" in location 202 will enable Automatic arming. The arming time is programmed in location
198-201. If automatic arming is enabled, the keypad sounder will activate for 50 seconds before automatically
arming. If the sounder is silenced by entering a valid arm/disarm code during the 50 second time frame, the panel
will not arm. If the sounder is still on at the end of 50 seconds, the control will arm. Any zones not secured will be
bypassed when automatic arming is used.
LOCATION 203: DYNAMIC BATTERY TEST
The number programmed in location 203 determines the number of minutes (1 to 15) the 7600 will perform dynamic
battery testing during each 24 hour period. The red "Power" LED will flash if the battery fails the dynamic test.
Factory default is "0" (disabled).