CADDX RANGER 7600, Руководство по установке

Страница: 33 / 38

33
APPENDIX 1 - REPORTING IN SIA FORMAT
The 7600 has the ability to report SIA level 1 transmissions to either or both phone numbers. Each report in SIA
consists of an Event Code and a Zone or User ID. The Zone is programmed in the first digit of each report. When
programming the event code (the second digit) for zones 1-6 (locations 105, 107, 109, 111, 113, or 115),
programming a zero will cause the event code to follow the zone type for that zone. The event code for the zone type
can be overridden by programming a digit from the table below. Duress (location 87), AUX 1 (location 89), AUX 2
(location 91), and Keypad Panic (location 93) must be programmed from the table below.
Programmed Event SIA Code Description
1
FA Fire Alarm
2 PA Panic alarm
3
BA Burglary Alarm
4 GA Gas Alarm
5
KA Heat Alarm
6 WA Water Alarm
7
QA Emergency Alarm
8 SA Sprinkler Alarm
9
UA Untyped Alarm
10 HA Holdup Alarm
11
MA Medical Alarm
12 ZA Freeze Alarm
13
TA Tamper Alarm
14 RP Periodic Test
15
YF System Fault
The following reports will send fixed event codes regardless of the number programmed in the event code location:
Event SIA Code Event Code Location
Keypad Tamper TA 95
Download Complete RS 97
Autotest RP 99
Fail to Communicate RT 101
Closing CL 102
Opening OP 103
Start Test TS 116
End Test TE 116
AC Loss AT 121
Low Battery YT 123
Trouble T* 124
Bypass B* 125
Bypass Restore
U *
125 - 126
Restore R * 126
Cancel OC 127
Exit Error EE 210
Recent Closing CR 211
Auxiliary 3 UA 253
User on site YY 254
*These will send the event code for the zone bypassed, restored, or in trouble.