
25
LOCATION 207: CALLBACK PHONE NUMBER CONTROL
The number programmed in location 207 controls the use of the callback telephone number. The callback number
must be programmed in the download section for this location to have an effect. Add the sum of the features you
desire and program that number in Location 207.
VALUE
DESCRIPTION
1
Add if a callback should not occur before a download session
2
Add if [
r
] [8] [#] sight initiated download is enabled
4
Add if callback at autotest intervals is enabled
8
Add for automatic callback when event log is full
LOCATION 208: FORMAT OVER-RIDE LOCATION
The number selected in this location will select the format options as follows:
VALUE
DESCRIPTION
1
Add for Pager format
2
Add for Ademco Handshake
4
Add for Caddx modem
8
Add for Sescoa Superfast
LOCATION 209: FORMAT OVER-RIDE LOCATION
The number selected in this location will select the format options as follows:
VALUE
DESCRIPTION
1
Add for Contact ID
2
Add for SIA
4
Add for 4 + 3
8
Add for DTMF transmission
LOCATION 210: PROGRAMMING TO REPORT EXIT ERROR
The Ranger 7600 has the ability to report an exit error code if an entry/exit zone is violated at the moment the exit
delay expires. The desired exit error code is programmed in location 210. If this location contains a "0", exit
errors will not be reported. When using the remote arming input, the man number is 1. When using a one button
"Quick Arm" code the man number is 1. When Contact ID is selected, program any number to activate this report.
LOCATION 211: PROGRAMMING TO REPORT RECENT CLOSING
The Ranger 7600 has the ability to report a recent closing code if an alarm occurs within 5 minutes of a closing. The
desired recent closing code is programmed in location 211. If this location contains a "0", recent closings will not be
reported. When using the remote arming input, the man number is 1. When using a one button "Quick Arm" code
the man number is 1. When Contact ID is selected, program any number to activate this report.
Содержание RANGER 7600
Страница 4: ...4 TERMINAL DRAWING SPECIAL NOTES...
Страница 7: ...7...
Страница 36: ...36 NOTES...
Страница 37: ...INSIDE BACK COVER IS BLANK...