CADDX RANGER 7600, Руководство по установке

Страница: 12 / 38

12
!!!! IMPORTANT NOTE !!!!
WHEN PROGRAMMING THE FOLLOWING COMMUNICATOR CODES,
A "10" MUST BE PROGRAMMED IN ORDER TO REPORT A ZERO (0).
LOCATION 086-087: PROGRAMMING THE RANGER 7600 FOR DURESS CODE CAPABILITY
The Ranger 7600 has the ability to report a duress code when the system is armed or disarmed with user code
number 7 and a duress communicator code is programmed in locations 086-087. If both locations are "0", the duress
capability is disabled and user code number 7 can only be used as a standard arm/disarm code. Location 086
contains the standard digit, and location 087 contains the extended digit. When Contact ID is selected, program the
extended or the second location with the required event code from Appendix 2 to enable this report event.
LOCATION 088-089: PROGRAMMING FOR AUXILIARY 1, [1] & [3] DOUBLE KEYPRESS
The Ranger 7600 has the ability to report an Auxiliary 1 code and activate the Priority siren each time the [1] and
[3] keys are pressed simultaneously on the keypad. The desired reporting code is programmed in locations 088-089.
If both locations are "0", the Auxiliary 1 double keypress is disabled. Location 088 contains the standard digit, and
location 089 contains the extended digit. If activated, the siren can be silenced by entering any arm/disarm code.
When Contact ID is selected, program the extended or the second location with the required event code from
Appendix 2 to enable this report event.
LOCATION 090-091: PROGRAMMING FOR AUXILIARY 2, [4] & [6] DOUBLE KEYPRESS
The Ranger 7600 has the ability to report an Auxiliary 2 code and activate the pulsing buzzer each time the [4] and
[6] keys are pressed simultaneously on the keypad. The desired Auxiliary 2 code is programmed in locations
090-091. If both locations are "0", the Auxiliary 2 double keypress is disabled. Location 090 contains the standard
digit, and location 091 contains the extended digit. If activated, the keypad sounder can be silenced by entering any
Arm/Disarm code. When Contact ID is selected, program the extended or the second location with the required event
code from Appendix 2 to enable this report event.
LOCATION 092-093: PROGRAMMING FOR KEYPAD PANIC, [
r r
] & [#] DOUBLE KEYPRESS
The Ranger 7600 has the ability to report a Keypad panic code and activate the Burg siren each time the [
r
] and
[#] keys are pressed simultaneously on the keypad. The desired Keypad panic code is programmed in locations
092-093. If both locations are "0", the Keypad panic double keypress is disabled. Location 092 contains the standard
digit, and location 093 contains the extended digit. If activated, the siren can be silenced by entering any Arm/Disarm
code. (Can also be silent - see Loc. 129) When Contact ID is selected, program the extended or the second location
with the required event code from appendix 2 to enable this report event.
LOCATION 094-095: PROGRAMMING THE KEYPAD TAMPER FEATURE
The Ranger 7600 has an optional tamper feature that, when enabled, will lock out the keypads for 1 minute if 30
random keypresses are made without producing a valid code. The desired tamper code should be programmed in
locations 094-095. If the control is not programmed for local only, the tamper will be communicated. If both locations
are "0", the tamper feature will not be enabled or reported. Location 094 contains the standard digit, and location
095 contains the extended digit. When Contact ID is selected, program the extended or the second location with any
number to activate this report.