CADDX RANGER 7600, Руководство по установке

Страница: 27 / 38

27
LOCATION 252-253: PROGRAMMING REPORT KEYPAD AUXILIARY 3
The Ranger 7600 has the ability to report a Silent Auxiliary 3 code each time the [7] and [9] keys are pressed
simultaneously on the keypad. The desired Auxiliary 3 code is programmed in locations 252-253. If both locations
are "0", the Auxiliary 3 double keypress is disabled. Location 252 contains the standard digit, and location 253
contains the extended digit. When Contact ID is selected, program the extended or second location with any number
to activate this report.
LOCATION 254: PROGRAMMING "USER ON SITE"
The 7600 has the ability to send a "user on site" report by entering [
r
] - [0], followed by a valid arm/disarm code at
the keypad when the system is not armed. This can be used to log the return of latch key kids or the presence of
employees. The desired "user on site" code is programmed in location 254. If this location contains a "0", "user on
site" report will not be sent.. When Contact ID is selected, program with any number to activate this report.
LOCATION 255: PROGRAMMING THE CROSS ZONE TIME
Location 255 contains the number of minutes (1 to 15) in which a second trip must occur on a cross zone before an
alarm is created. Care must be taken when activating this feature that two or more cross zones are set up
that will be tripped within this time frame in the event of a burglary. This feature should only be used on
interior zones. Never activate cross zoning on a perimeter zone.