Buffalo LinkStation 200B Скачать руководство пользователя | Manualshive

Страница: 2 / 121

background image

Notice

Regulatory Compliance Information

For Customers in the United States

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Warning Symbols and Graphical Icons on the Product

Warning symbols are used on the product for safety operation and prevention of injury to you and damage to the
unit. The following explains the meanings of symbols used on the product.

This symbol indicates important warnings or cautions for operation and maintenance. Additional
information will follow this symbol.

This symbol indicates the presence of a direct current.

This symbol indicates polarity of DC connector.

This symbol indicates that the equipment meets the safety requirements specified for class II.

Safety Precautions

Before using your device, basic safety instructions should always be followed.
(1)  Read these instructions.
(2)  Keep these instructions.
(3)  Heed all warnings and follow all instructions.

1

Notice

«
1
2
3
4
...
»

Содержание LinkStation 200B


























































































































Отзывы:

Нет отзывов

Похожие инструкции для LinkStation 200B

Бренд: RAID Страницы: 108

A16F-R2431 Galaxy Raid

Бренд: Rorke Data Страницы: 110

Бренд: SanDisk Страницы: 44

TrueNAS R Series

Бренд: iXsystems Страницы: 24

Бренд: Transcend Страницы: 24

Бренд: E-Lins Страницы: 9

Бренд: ZyXEL Communications Страницы: 2

Бренд: Watchguard Страницы: 32

Speed Touch 591s

Бренд: Alcatel Страницы: 184

Бренд: VME Страницы: 2

Бренд: Fujitsu Siemens Computers Страницы: 68

ipRocketLink 3101 Series

Бренд: Patton Страницы: 119

TeraStation WSS WS5020N6

Бренд: Buffalo Страницы: 115

DLAP-201 Series

Бренд: ADLINK Technology Страницы: 39

SuperServer 1029U-T Series

Бренд: Supermicro Страницы: 1

Бренд: IBM Страницы: 228

Бренд: Planet Страницы: 431

Бренд: Umniah Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды