5
Boiler block assembly
Logano G225/Logano plus GB225 - We reserve the right to make any changes due to technical modifications.
19
5.1.5
Knocking the centre section into place
V
Turn the centre section around and locate with the
upper and lower boiler hubs on the boss liners of the
rear section.
V
Drive the centre section onto the rear section [2] using
a wooden or a rubber mallet [1].
Fig. 10 Knocking the centre section into place
1
Wooden or rubber mallet
2
Rear section
5.1.6
Boiler section alignment
V
Right the part assembled block comprising two boiler
sections.
V
Position a flat board [1] underneath the centre section
[2] so that the boiler heat exchanger is slightly tilted to
the rear for the subsequent assembly process.
Fig. 11 Righting the part assembled block
1
Flat board
2
Centre section
6 720 615 876-10.1RS
2
1
Warning: Risk of injury due to inadequately
secured boiler sections.
V
Secure the partly assembled boiler heat
exchanger against tipping over.
6 720 615 876-11.1RS
2
1
