5
Boiler block assembly
Logano G225/Logano plus GB225 - We reserve the right to make any changes due to technical modifications.
32
Fitting the temperature sensor and communication
cable
V
Press the cable grip [1] into the holes provided in the
bottom crossmember.
V
Lay the cables over the thermal insulation.
V
Insert the cables into the strain relief. The clear length
must be 70 to 75 cm.
V
Secure the cables via the strain relief using two self-
tapping screws.
The cables must always be laid as shown, regardless of
whether the door opens to the right or to the left.
Fig. 39 Fitting the temperature sensor and communica-
tion cable
1
Strain relief
2
Temperature sensor and communication cable
A
Push the strain relief into the holes of the lower tie bar
B
Insert and secure the cables
Fitting the mains power cable
V
Fit the cable clip [1].
V
Insert mains supply cable into the cable clip [1].
The mains power cable must always be laid as shown,
regardless of whether the door opens to the right or to the
left.
Connecting cables to the SAFe
V
Connect temperature sensor [2], communication [3]
and mains power cables to the SAFe [4] as shown in
the wiring diagram (
Æ
burner documentation).
Fig. 40 Fitting the mains power cable
1
Cable clip for mains power cable
2
Temperature sensor lead
3
Communication cable
4
SAFe
6 720 615 876-39.1RS
A
B
2
1
6 720 615 876-40.1RS
4
3
2
1
