5
Boiler block assembly
Logano G225/Logano plus GB225 - We reserve the right to make any changes due to technical modifications.
26
5.1.11 Fitting the flue outlet
The flue outlet is fitted with a cord gasket.
V
Remove the washers and nuts from the threaded studs.
V
Position the flue outlet onto both threaded studs on the
rear section and secure with nuts.
Fig. 24 Fitting the flue outlet
5.1.12 Closing the boiler hubs
The reducer supplied is required for fitting the boiler fill &
drain valve (not supplied).
V
Fit and seal the reducer into the bottom rear boiler
boss.
V
Fit the boiler fill & drain valve to the reducer.
Fig. 25 Fitting and sealing the reducer
1
Reducer (R 1½" to Rp ½")
V
On the front boiler section, seal off the top boiler boss
with the blanking plate [1].
V
Insert the blanking plug [2] with plain washer in place
into the bottom boiler boss.
Fig. 26 Closing the boiler hubs at the front section
1
Dummy flange
2
Blanking plug
6 720 615 876-24.1RS
6 720 615 876-25.1RS
1
6 720 615 876-26.1RS
2
1
