5
Boiler block assembly
Logano G225/Logano plus GB225 - We reserve the right to make any changes due to technical modifications.
18
5.1.3
Preparing the centre section
Prepare the centre section in the same way as the rear
section (
Æ
5.1.1, page 16).
Fig. 8
Preparing the centre section
1
Boiler boss sealing face
2
Packing grooves
5.1.4
Inserting the packing cord
V
Unroll the required length of packing cord from the roll
supplied.
V
Peel the backing paper from the packing cord, as you
insert the cord into the packing groove.
V
Insert the flexible packing cord into the packing groove,
starting in the upper boiler hub area, and lightly press
in.
V
Where the 2 ends meet, overlap the packing cord by
2 cm and press firmly together.
Fig. 9
Inserting the packing cord
6 720 615 876-08.1RS
2
1
1
Caution: Risk of system damage due to
leaking boiler sections.
V
To ensure that the joint faces between the
boiler sections are properly sealed, the
packing cord must not be stretched
during fitting.
V
Carefully insert the packing cord into the
boiler packing grooves.
6 720 615 876-09.1RS
