install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
7.19.4
7.
When successful, a Connection
established pop up message will
appear, click on the
OK
button, as
shown on the right.
If the connection fails, ensure that both
the serial cable is connected and that a
show is running on the Broadcast Pix
Switcher.
Once communication has been
established, a series of tabs will
appear at the top of the window.
To assign Macros to audio inputs:
1.
Click on the
Microphone settings
tab
on the top of the window.
A list of all available mic inputs will
appear, 1-8 for each VOX unit
connected, as shown on the right.
Each labeled input corresponds to the
physical audio input on each VOX unit.
2.
Click on the
Pick macros
button, and
a pop up screen will appear.
3.
In the Add a macro: drop down menu,
select the desired
macro
, in this
example Mic B Zoom, and click on the
Add this macro to this list
link.
Each input may have unlimited
macros. When an input triggers an
assigned macro it will randomly
choose a macro from this list. To have
a greater chance to run a certain
macro, like a close up of the talent,
simply add the macro to the list again.