install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
6.1.1 To Select a Clip by Name
1.
Press the
[Clips]
Button if it is not already illuminated.
2.
Select the desired clip by name by pressing its
PixButton in the PixPad. In the example above, to
select the “02 Light Swipe” clip, press the
[Clip 1 Light
Swipe]
PixButton, and it will illuminate. The selected
clip will appear on the Multi-View in its source window
as well as on the PixPad where it will change from
grey to orange (red if the Clip Store is on air) and its
name will appear
in the display and in the Clip
PixButton in the program row.
3.
Push the
[>]
motion button, it will turn orange, the clip
will start to play and its time code will be in the the
display as well as the Multi-View.
6.1.2 To Select a Clip by Number
1.
Press the
[Clips]
Button if it is not already illuminated
2.
On the Clip Store PixPad, press the
[Controls]
PixButton, which will bring up the clip controls PixPad,
then press the
[Numeric Keypad]
PixButton, and it
will bring up the numeric keypad PixPad, as shown
below.
3.
Enter the clip
[Number]
you wish using the numeric
keypad. As you enter each number it will appear in the
display.
4.
Press the
[Enter]
PixButton and the selected clip will
appear on the Multi-View, its name will appear in the
display, and its time code will be shown. The PixPad
will change to the Library containing the selected clip,
which will be illuminated.
5.
Push the
[>]
motion button, and it will turn orange and
the clip will start to play, and its time code will advance.
6.1.1
NOTE:
To select a clip by number, the clip file name must have digits in front of the name, i.e. “02 Open”.