install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
6.5.3
6.
To have Auto-Start capabilities,
enter the switcher input in the
Input Number
text field, as shown
on the right.
This number is the physical input
number on the Mica Switcher
7.
Click on the
Select Clips…
button
and the Select DDR Clips window
will appear, as shown on the right.
If the DDR/Omneon control is not
added to the current show, the
Select Clips button will not be
visible.
See the next section for adding
the server control to a show.
8.
Select the clips you wish to access
from the panel by clicking on
each
clip
individually, and each it will
highlight, as shown.
To deselect a clip, click on it again
and it will revert to white.
The clips that are selected in this
window will appear in all 3/4
channels of the DDR.
9.
Click on
OK
on the Select DDR
Clips window.
10
Then click on
OK
on the DDR
settings window, to save your clip
settings.
NOTE:
When naming your clips on an external server, it is important not to have a name longer than
8 characters long. The VDCP protocol only supports file names with 8 or less characters.