install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
4.9.1
To activate angles:
1.
Open the Fluent Controls window by
selecting the
Panel, Fluent Controls
menu from the Broadcast Pix menu
button, as shown on the right.
2.
Along the left edge of the Fluent
Control window, select the
Virtual
Sets
button, it will illuminate blue as
shown of the right.
3.
The top section, labeled Angles,
designates how many inputs on the
system will be used as a Virtual Set
input.
Click on the
Angles
menu bar, and
drop down menu will appear.
4.
In the
Angles To Display
menu,
select how many inputs to show and
use for Virtual Sets, either
1, 2, 3, 4,
5, 6, 7
or
8
, as shown on the right.
A thumbnail for each angle will
appear along the top strip of angles.
Some thumbnails may appear grey,
these are unassigned angles.
5.
To assign a SDI switcher input to an
angle, click on the
(Assign…)
button
on the bottom of the thumbnail and a
pop up window will appear.
6.
In the Assign Angle Source window,
select
which switcher input, 1-8, will
be used, as shown on the right.
7.
Click on the
OK
button.
The source is now married with an
angle.