install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
4.10.2 External Key Operation
The external key may be assigned to any Key, except Key 6 if PowerAux is enabled.
When the Key Fill input is assigned to a keyer, the Cut channel is automatically assigned
to the keyer as well. When the external keyer is in use, all the Keyer Modifiers discussed
in section 4 are still available. Note that the external cut signal is not assignable or visible
on the Multi-View. This example will use Key 4.
To operate the external keyer:
1.
Select the
[Key 4 Select]
PixButton in the Destinations Row, it will illuminate
orange, as shown below.
2.
Select the
[CG Fill]
button using the Sources Row.
The PixPad will change, showing the Key 4 Modifiers and the display will change
showing Clip and Gain adjustments, as shown below.
3.
To preview the external keyer over your background video, select the
[Key 4
Transition]
button.
4.
Adjust the Clip by using the
[Clip Knob]
and adjust the Gain by using the
[Gain
Knob]
. To invert the key to adjust the clip/gain settings, select the
[X Key Invert]
PixButton. The display will read out
Inv.
To turn off the invert, reselect the [X Key
Invert] PixButton.
4.10.2
BGR
Key
4
Key
1
Key
2
Key
3
Key
5
Key
6