install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
7.7.5 Telemetrics Camera Control Settings
It is possible to change various settings in the Telemetrics Camera Control Settings
window. For Telemetrics systems you may change the COM port assignment and baud
rate for each camera in addition to the Joystick control speed.
7.7.5
1.
In BPswitcher go to the
Setup
menu and
select
System Settings…,
as shown on
the right.
2.
In the System settings window, select the
Devices
tab.
3.
In the list of enabled devices select
Telemetrics Camera Control
and select
the
Settings…
button.
The Camera Control Settings window will
appear as shown on the right.
4.
In the Camera Control Settings window
click the
Camera Number
drop down menu
to select a camera 1-10 and change the
Comm Port
number to the appropriate
communications port.
If connecting to the Studio Software CPC-
ST-S, only Camera 1 needs to be
configured.
5.
Under the Baud Rate drop down menu
select either
9600
when connecting directly
to a camera or when using the STS-12
or
38400
when connecting to the Studio
Software CPC-ST-S.19200 is reserved for
future use.
6.
To adjust the custom joystick speed to
control the zoom/pan/tilt/dolly/pedestal
select
1, 2, 3, 4,
or
6
in the Joystick Speed
option. 1 is the slowest and 6 is the fastest.
7.
To save the settings, select the
Close
button. In the System Settings window, click
on the
OK
button to close the window.