install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
4.13.2
5.
In the following PixPad select the
[MEM
Start Record]
PixButton, as shown on the
right.
Note that the Macro Editor or Player does
not need to be opened for recording to
occur. However, if the Macro Player is open
a list of commands being recorded will be
visible in the Macro Display.
Macros is now waiting for the first panel
operation to occur for the timer to start.
The Record button will remember every
button/command selected and it’s timing
sequentially.
6.
Select
the desired buttons on the control
panel.
The display will read out that the Macro is
recording, the counter in the lower right
corner will start to move and the Play
motion control button will illuminate red.
7.
When the macro is finished being recorded,
select the
[MEM]
button in the Device
Control, it will illuminate orange.
8.
Select the
[Back]
motion control button to
stop the recording, as shown on the right.
The Play motion control button will turn off
and the display will read out Recording
ended.
4.13.3 Editing a Macro
The Macro Editor can display only one active macro at time, allowing for only one
macro to be edited at a time. After a macro has been recorded it can be opened in the
Macro Editor to be modified. Once in the Editor, the Action List may be reordered and
modified, new commands can be inserted and the timing of each command can be
adjusted. All the editing is done in the Macro Editor with the keyboard and mouse.