install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
7.18.3
7.18.3 AJA KiPro Control Settings
1.
In BPswitcher go to the
Setup
menu
and select
System Settings…,
as
shown on the right.
2.
In the System Settings window, select
the
Devices
tab.
3.
In the list of enabled devices select
AJA KiPro Control
it will highlight
orange
and select the
Settings…
button.
The KiPro settings window will appear
as shown on the right.
4.
Enter
the IP Address of each KiPro in
the text field, the . (periods) are
necessary, as shown on the right.
Up to 12 IP addresses may be added,
as each number is entered the system
attempts to verify if the connection is
valid, this may result in a slight delay
as numbers are entered.
5.
Once a valid IP address is entered, the
Setup
button will illuminate. Selecting
this button will open a web browser
with AJA controls, please refer to the
KiPro manual on modifying those
settings.
6.
Click on the
Save settings and close
button to save the changes.
If the IP address is invalid a pop-
up warning will appear asking to
re-enter a valid address.
7.
Click on the
OK
button in the System
Settings window to close it.