install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
7.7 Changing Camera Control Device Settings
It is possible to change various settings in the Camera Control Settings window. For
Sony Camera Control you may change the COM port assignment for each camera,
as well as where the camera is located on the daisy chain, in addition to the input
number for tally output on supported camera models. Although the control supports
up to 16 presets, each Sony camera has a fixed number of presets, i.e. an EVI-HD1
has 6 available presets where as a BRC-H700 has 16.
7.7.1 Sony Camera Control Settings
7.7
1.
In BPswitcher go to the
Setup
menu and
select
System Settings…,
as shown on
the right.
2.
In the System settings window, select the
Devices
tab.
3.
In the list of enabled devices select
Sony
Camera Control
and select the
Settings…
button.
The Camera Control Settings window will
appear as shown on the right.
4.
Click the
Camera Number
drop down
menu to select a camera 1-12 and
change the
Comm Port
number to the
appropriate communications port.
5.
If the camera head has built-in tally, enter
Granite Switcher input number in the
Input Number
text field. Enter 0 to have
no tally.
6.
If using a daisy chain configuration,
under the
Daisy Chain Position
drop
down menu, select where the camera is
located in the daisy chain either
Position
1
to
Position 7
. If no daisy chain is being
used, select
Position 1.
7.
To save the settings, select the
Close
button. In the System Settings window,
click on the
OK
button to close the
window.