install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
5.9.7
To Configure Timers:
1.
Click on the
Data Menu
and a drop down
menu will appear, as shown on the right.
2.
Select the
Timers
option and the Data Panel
will change to view the Timers properties.
3.
Up to 2 Countdowns and up to 2
Stopwatches, for a total of 4 timers may be
configured and linked to files. Stopwatches
count up and have the option to not have an
end time.
Click on the
Countdown1
radio button, as
shown on the right.
4.
To change the display format, click on the
Format
drop down menu. A list of available
display formats will appear, as shown on the
right.
Select
the desired format. The
Countdown1 display will update showing the
new format.
5.
Each timer can be set with a start time and
end time. To modify the start and end time
enter
the desired time in the
Start: (h:m:s)
and/or
End: (h:m:s).
6.
In addition, each timer has an end action
which can be triggered. Click on the
Action At
End:
drop down menu and select either
Ignore, Loop, Stop, Stop & Hide
or
Stop &
Reset.
If a stopwatch is set to Ignore as an end
action, the end time field will be disabled.
7.
To configure Countdown2, Stopwatch1 and/or
Stopwatch2, repeat steps 3 - 6.