install - concepts - PixMaster - switcher - CG - clips - controls - team - appendix
Broadcast Pix
V3.0
4.13.8
4.12.8 Playing back files not in shows
Due to the file-based architecture of Fluent Macros, it can play back any graphic or clip
file that lives in the graphic or clip directory, even if that files is not in the active show.
This feature reduces the risk of incorrect content being played back, for example clips
for openers, bumpers and alpha wipes. In addition, it allows more advanced users to
create Macros for novice users without the worry of incorrect playback.
Since only files in a show can be modified from the control panel, files not in a show are
played backed as they were created/modified with a macro. In this case the control
panel will provide feedback of files not in a show to advise the user. The Multi-View, on
the other hand, will display the correct file name and attributes.
The control panel source PixButtons and display will look similar to the example below:
3.
If a macro has a pause point, the
PixButton will illuminate orange, as shown
on the right. To resume playing a paused
macro, re-select the active
[PixButton]
.
The PixButton will illuminate red.
4.
To stop running a macro, re-select the
macro/SnapShot
[PixButton]
or select the
[Back]
motion control button in the Device
Control, as described in the previous
section. The button will return to a green/
not selected state.
5.
To return the Memory Row back to a
Source Control and display row, select
the
[Names/Memories]
PixButton.
The button will return to a green/not
selected state, as shown on the right.