Bowa ARC 300, Руководство по эксплуатации

Страница: 49 / 116

6 Operation
900-350_IFU_V2.6_10296-S13-20100111-EN ARC 300 / ARC 350 Operating manual
49
CAUTION
Risk of injuring patients due to excessive output transfer!
X Always check settings prior to activation.
6.3.13. Program 12 "DryCUT"
This program is a technology used to generate a so-called dry cut. It is
used in cardiac surgery, particularly in hemostasis of receding blood
vessels in the area of the sternum.
In this program, a larger controlled arc can be generated via which
significantly deeper coagulation can be achieved.
6.3.14. Program 13 "SimCOAG"
The configured output applies to both output sockets and is distributed
according to the tissue structure.
The program is used in the field of cardiac surgery for simultaneous
preparation.
In this program, two monopolar connection sockets can be activated
simultaneously to facilitate the simultaneous use of two manually
switched instruments.
;
The key/display for “Monopolar output 1”
35
and “Monopolar
output 2”
39
as well as the key/display for "Forced Coagulation"
current
13
light up.
X
Connect the handpieces with finger switches to the output
sockets
36
/
40
.
ª
Both handpieces with finger switches can be switched on or off
independently of each other.
It is not possible to work in cutting mode and key/display
12
is
deactivated.
6.3.15. Program 14 "Chest"
This program is used in thoracic surgery.
In this program, a cutting current and forced coagulation are used.
Maximum output is limited to 90 W.