Bosch DiBos Скачать руководство пользователя страница 91

Страница: 91 / 158

DiBos/DiBos Micro

Default Configuration | en

Bosch Sicherheitssysteme GmbH

Installation Guide

F.01U.033.308 | V7 | 2009.09

And

All selected inputs and cameras with motion detection must

trigger in order to start the job.

Only one input or one camera with motion detection must

trigger in order to start the job.

Day I Night I Weekend

...

Select the time profile. The job is assigned to this time

profile.

Note:

Only the time profiles configured under

Time periods

are

displayed.

Note:

With the

Copy settings to other time periods...

button, it is

possible to quickly copy jobs to other time periods.

Alarm recording list

The inputs or cameras selected under

Trigger

trigger an

alarm recording for locally connected cameras.

Edit...

Click the button. A dialog box opens. Select the cameras for

which alarm recording should take place.

Protect alarm

recordings

Activate the check box. The alarm recordings are protected

against overwriting (including pre-alarm images).

Note:

Protected data will only be automatically deleted after a

specified number of days if the

Delete old video

and

Delete

protected data

options are activated under

Recording

settings

. It is also possible to manually delete data via the

user interface.

Relay control

Specify the relay that is to be controlled.

Activate

Activates the relay to be controlled.

Relay:

Select the relay to be controlled.

Action:

Select the relay behavior.

Relay behavior:

–

Start of event

: At the start of an event the relay switches

for one second.

–

End of event

: At the end of an event the relay switches

for one second.

–

Follow event

: The relay switches at the beginning of the

event, maintains this status during the event and returns

to its original status at the end of the event.

–

Follow recording

: The relay switches at the start of the

event and only returns to its original status after the end

of alarm recording (including the post-alarm time).

Содержание DiBos































































































































































Результаты поиска

Содержание DiBos

Отзывы:

Похожие инструкции для DiBos

Бренды по названию

Популярные бренды

Bosch DiBos, Руководство по установке

Результаты поиска

Содержание DiBos

Отзывы:

Похожие инструкции для DiBos

Бренды по названию

Популярные бренды