Bosch DiBos Скачать руководство пользователя страница 7

Страница: 7 / 158

DiBos/DiBos Micro

Safety Notes | en

Bosch Sicherheitssysteme GmbH

Installation Guide

F.01U.033.308 | V7 | 2009.09

Safety Notes

The following safety notes must be observed:

Read, follow and retain instructions

All safety and operating instructions must be read and followed before installing the

device. Retain instructions for future reference.

Observe warnings

Observe all warnings on the device and in the operating manual.

Add-on devices

Do not use add-on devices that are not recommended by the product manufacturer as

these may cause hazards.

Installation notes

Do not place the device on an unstable mounting, tripod or similar. The device may fall to

the ground and seriously injure the user or be damaged itself. Only use accessories that

have been recommended by the manufacturer or are delivered with the device. Fit the

device according to the manufacturer's instructions. Exercise extreme caution when

transporting the device on a trolley. Abrupt stopping, extreme force effects and uneven

surfaces may cause the device and the trolley to tip over.

Cleaning

Unplug the device from the mains power supply before cleaning. Follow all instructions

for the device. Normally, cleaning can be carried out with a damp cloth. Do not use liquid

cleaners or cleaners in spray cans.

Service

Do not attempt to service the device yourself. You may be exposed to high electrical

voltages or other hazards if you open or remove covers. Servicing must be carried out by

qualified maintenance personnel.

Damage requiring service.

Unplug the device from the mains power supply and arrange for the device to be serviced

by qualified personnel if:

–

The mains cable or mains plug is damaged.

–

Liquids or foreign bodies are present in the device.

–

The device has come into contact with water and/or has been exposed to extreme

environmental conditions (e.g. rain, snow etc.).

–

If the device does not work properly in spite of following the operating instructions,

make changes only to those operating elements that are described in the operating

instructions. Incorrect changes to other operating elements may cause damage

requiring extensive repair work to be carried out by qualified service personnel.

–

The device has fallen to the ground or the housing has been damaged.

–

A noticeable change in the performance of the device has occurred. In this case, the

device must be serviced.

Spare parts

If spare parts are required, service personnel must use spare parts that are

recommended by the manufacturer or correspond to the original parts. Using the wrong

spare parts may result in fire, electric shock or other hazards.

Safety test

When servicing or repair is complete, ask service personnel to carry out a safety test to

ensure that the device is working correctly.

Содержание DiBos































































































































































Результаты поиска

Содержание DiBos

Отзывы:

Похожие инструкции для DiBos

Бренды по названию

Популярные бренды

Bosch DiBos, Руководство по установке

Результаты поиска

Содержание DiBos

Отзывы:

Похожие инструкции для DiBos

Бренды по названию

Популярные бренды